Sale
Zoom the image with mouse

SDI Pola Office - Tooth Whitening System

SDI
1. One patient kit
2. Three patient kit
3. Bulk kit
Rs. 3,200 Rs. 11,525
Quick and easy in-office tooth whitening system.

Key features
1. No bleaching light required.
2. Maximum comfort.
3. Built-in desensitiser.
4. Just one thin layer.
Style :

Pola office - Quick and easy in-office tooth whitening system.

  • A single use, simple in-office system.
  • Minimal chair time required – whiter teeth are achieved in just 30 minutes.
  • Pola office’s unique desensitising properties inhibit patient post-operative sensitivity.
  • Pola Office uses a 35% hydrogen peroxide formula to give you and your patients quick and efficient results without excessive time wasted chairside.              

No bleaching light required

  • No light is required to accomplish effective results, however any heat emitting curing light will accelerate the bleaching process to achieve results in just 30 minutes.

Built in desensitiser

  • Pola Office contains potassium nitrate, a known desensitising agent.
  • It acts on the nerve endings by blocking transmission of sensitive nerve impulses and providing a calming effect.

Flexible gingival barrier

  • Pola Office’s flexible gingival barrier allows for a quick and clean removal.
Indications:

1. Whitening of discoloured vital teeth.
2. Whitening of discoloured non-vital teeth

Precautions:

1. Corrosive attacks eyes – protect eyes when using. Avoid contact with skin.
2. For professional use only.
3. Operators must wear gloves, mask and protective eyewear.
4. Do not use on pregnant or lactating women.
5. Do not use on children under 14 years of age.
6. Do not use the Gingival Barrier on any persons having known resin allergies.
7. Do not use Pola Office on any persons having known peroxides allergies.
8. Anyone with a history of chemical allergies is advised to undergo allergy checks before treatment.
9. Do NOT anaesthetize patient.
10. Pola Office Liquid syringe may be under pressure – remove cap carefully.
11. Do not allow mixed gel or Pola Office Liquid to come in contact with skin, eyes and soft tissues.

Tips:

1. Select appropriate candidate.
Note: Not everyone is suitable for in-office whitening e.g. patient with translucent teeth or in the Vita* C group.
2. Patient must have good overall health.
3. Seal all exposed roots and restorations.
4. Inform patient that results are not guaranteed as the removal of stains varies between patients.
5. Acid etching before treatment is NOT recommended.
6. Large diameter suction tips are not recommended as they can spread the gel to other areas.
7. Mild discomfort in teeth during treatment can be a common side effect.
8. If patient experiences sensitivity during light curing, move the tip slightly away from the tooth. If this doesn’t work, remove gel and rinse the affected area. Assess other possible causes.
9. Delay any esthetic restorations for 2 to 4 weeks after treatment.
10. Advise patient not to smoke, consume highly coloured, hot or cold foods or beverages for at least 2 days.
11. Treat any post-operative sensitivity with a desensitizing gel or toothpaste.
12. Prescribe Pola Day or Pola Night to maintain brightness if desired.
Technical Detail:
1. Hydrogen Peroxide 35%
2. Desensitizer-Pottasium Nitrate

Composition:

Pola Office Liquid
35% Hydrogen peroxide
65% Water

Pola Office Powder
73.26% Thickeners
26.2% Catalysts
0.04% Dye
0.5% Desensitizing agents

Gingival Barrier
83.95% Methacrylic ester
0.04% Pigment
16% Silica
0.01% Butylated hydroxy toluene
1. One patient kit contains-
2 x 0.3g pola office powder pots
2 x 2ml polaoffice syringes
1 x 1g Gingvial Barrier syringe
Accessories

2. Three patient kit contains-
6 x 0.3g pola office powder pots
6x2ml polaoffice syringes
3 x 1g Gingvial Barrier syringe
Accessories

3. Bulk kit contains-
1 x 3g pola office powder jar
1 x 20ml polaoffice liquid bottle
3 x 1g Gingvial Barrier syringe
Accessories
INSTRUCTIONS FOR NON-VITAL TOOTH WHITENING

1. Determine and record pre-operative shade.
2. Isolate tooth/teeth undergoing whitening using a rubber dam. Ensure the dam fits tightly at the cervical margin. Note: If a rubber dam is not used, cover approximately half of the adjacent vital teeth with 3-4mm thick layer of Gingival Barrier to insulate from heat discomfort of the curing light. This is done when one tooth is being whitened non-vitally.
3. Open lingual access to pulp chamber and remove all composite, base material and gutta percha 2-3 mm apical to the CE junction. Place a glass ionomer/zinc phosphate base, at least 1 mm thick to ensure a barrier between the “sealed” root canal and whitening gel.
4. Place and light cure a thick layer of Gingival Barrier at the gingiva region of the isolated tooth.
5. Mix the Pola Office gel as instructed in steps 6-8 of the vital tooth bleaching instructions.
6. Place the Pola Office gel into the opened pulp chamber and onto the labial surface.
7. Leave gel on/in for 8 min (Optional: curing light may be used at this stage, please refer to light manufactures recommendations) NOTE: If using a curing light and treating inner and outer surfaces, 2 curing lights can be used (one on each side of tooth) to activate Pola Office.
8. Suction off the gel.
9. Repeat steps 6-8 until desired shade is achieved. Note: One pot should only be used for 2 applications or within 20 minutes of mixing.
10.After the last application, suction and wash the gel off.
11. Remove Gingival Barrier and re-seal tooth with appropriate restorative.
12. Record the final shade.

INSTRUCTIONS FOR VITAL TOOTH WHITENING:

1. Determine and record pre-operative shade.
2. Clean teeth with ONLY a flour based pumice.
3. Place cheek retractors and then cover exposed lip surface with petroleum gel.
4. Dry teeth and apply Gingival Barrier to both arches, slightly overlapping enamel and interproximal spaces.
5. Light cure in a fanning motion for 10-20 seconds until Gingival Barrier is cured.
6. Open powder pot. Take one Pola Office syringe, firmly attach a tip, and carefully pull back plunger to release pressure.
7. Carefully extrude contents of syringe into the pot.
8. Immediately mix using a brush applicator until gel is homogeneous.
9. Apply a thick layer of gel to all teeth undergoing treatment.
10. Leave gel on for 8 minutes (Optional: a curing light may be used at this stage, please refer to light manufacturer’s recommendations)
11. Suction off using a surgical aspirator tip.
12.Complete Steps 9-11 three times (optional 4 times).
Note: One pot should only be used for 2 applications or within 20 minutes of mixing.
13.After the last application, suction all the gel off, then wash and apply suction.
14. Remove Gingival Barrier by lifting it from one end.

Storage:
1. Store in a cool and out of direct sunlight at temperatures between (2°-25°C / 35°-77°F).
2. Do not use after expiration date.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
Top
ic-expand
ic-cross-line-top